Straight-through output path (HP LaserJet 3390/3392 all-in-one)
To clear a jam in the straight-through output path, perform the following steps:
CAUTION
Do not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.
When removing jammed media, pull the jammed media straight away from the all-in-one.
Pulling jammed media out of the all-in-one at an angle can damage the all-in-one.
1.
Open the rear output door.
2.
Rotate the green pressure release levers downward.
ENWW
Clearing jams
315
3.
With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.
HP LaserJet 3390/3392
NOTE
If you cannot grasp the media with your hands, perform the procedure in
cartridge area
.
4.
Close the rear output door.
HP LaserJet 3390/3392
NOTE
The pressure release levers automatically close when you close the rear output
door.
316
Chapter 13 Troubleshooting
ENWW