HP LaserJet 3055 All in One Printer - Input trays (HP LaserJet 3390/3392 all-in-one)

background image

Input trays (HP LaserJet 3390/3392 all-in-one)

To clear a jam in the input trays, perform the following steps:

CAUTION

Do not use sharp objects, such as tweezers or needle-nose pliers, to remove

jams. Damage caused by sharp objects will not be covered by the warranty.

When removing jammed media, pull the jammed media straight away from the all-in-one.
Pulling jammed media out of the all-in-one at an angle can damage the all-in-one.

1.

Open the rear output door.

2.

Rotate the green pressure release levers downward.

3.

Open the single-sheet priority input slot (tray 1) door.

HP LaserJet 3390/3392

312

Chapter 13 Troubleshooting

ENWW

background image

4.

With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.

HP LaserJet 3390/3392

5.

Close the single-sheet priority input slot (tray 1) door.

HP LaserJet 3390/3392

6.

Open tray 2 and tray 3.

7.

With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.

ENWW

Clearing jams

313

background image

8.

If no media is visible, open the print-cartridge door, remove the print cartridge, and rotate the
upper media guide. Carefully pull the media up and out of the all-in-one.

9.

Close the main input tray (tray 2).

10.

Close the rear output door.

314

Chapter 13 Troubleshooting

ENWW