Input trays (HP LaserJet 3050/3052/3055 all-in-one)
To clear a jam in the input trays, perform the following steps:
CAUTION
Do not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.
When removing jammed media, pull the jammed media straight away from the all-in-one.
Pulling jammed media out of the all-in-one at an angle can damage the all-in-one.
1.
Open the tray 1 and pull any visible jammed media out of the all-in-one.
2.
If no media is visible, open the print-cartridge door, remove the print cartridge, and rotate the
upper media guide. Carefully pull the media up and out of the all-in-one.
3.
Close tray 1.
ENWW
Clearing jams
311