HP LaserJet 3055 All in One Printer - Printing and storage environment

background image

Printing and storage environment

Ideally, the printing and media-storage environment should be at or near room temperature, and not
too dry or too humid. Remember that paper absorbs and loses moisture rapidly.

Heat works with humidity to damage paper. Heat causes the moisture in paper to evaporate, while
cold causes it to condense on the sheets. Heating systems and air conditioners remove most of the
humidity from a room. As paper is opened and used, it loses moisture, causing streaks and
smudging. Humid weather or water coolers can cause the humidity to increase in a room. As paper is
opened and used it absorbs any excess moisture, causing light print and dropouts. Also, as paper
loses and gains moisture it can distort. This issue can cause jams.

As a result, paper storage and handling are as important as the paper-making process itself. Paper
storage environmental conditions directly affect the feed operation and print quality.

Care should be taken not to purchase more paper than can be easily used in a short time (about
three months). Paper stored for long periods can experience heat and moisture extremes, which can
cause damage. Planning is important to prevent damage to a large supply of paper.

Unopened paper in sealed reams can remain stable for several months before use. Opened
packages of paper have more potential for environmental damage, especially if they are not wrapped
with a moisture-proof barrier.

The media-storage environment should be maintained to ensure optimum performance. The required
condition is 20° to 24°C (68° to 75°F), with a relative humidity of 45% to 55%. The following
guidelines are helpful when evaluating the storage environment:

Print media should be stored at or near room temperature.

The air should not be too dry or too humid.

The best way to store an opened ream of paper is to rewrap it tightly in its moisture-proof
wrapping. If the all-in-one environment is subject to extremes, unwrap only the amount of paper
to be used during the day's operation to prevent unwanted moisture changes.

Avoid storing paper and print media near heating and air conditioning vents or near windows
and doors that are frequently open.

36

Chapter 3 Media specifications

ENWW

background image

4