HP LaserJet 3055 All in One Printer - Label construction

background image

Label construction

When selecting labels, consider the quality of the following components:

Adhesives: The adhesive material should be stable at 200°C (392°F), the maximum fuser
temperature.

Arrangement: Only use labels with no exposed backing between them. Labels can peel off
sheets that have spaces between the labels, causing serious jams.

Curl: Before printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any
direction.

Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.