To clean the automatic document feeder (ADF) pickup roller
assembly (HP LaserJet 3052/3055/3390/3392 all-in-one)
If your ADF has trouble feeding documents, you can clean the ADF pickup roller assembly.
1.
Turn off the all-in-one and unplug the power cord.
HP LaserJet 3052/3055
HP LaserJet 3390/3392
2.
Open the ADF cover.
3.
Press the round green button while lifting the green lever. Rotate the green lever until it stops in
the open position. The pickup roller assembly should remain on the surface.
4.
Remove the assembly, and then wipe the assembly with a soft, dry cloth.
290
Chapter 12 Managing the all-in-one and maintenance
ENWW
5.
Return the assembly to the same place in the ADF. The largest roller goes in back, and the gear
side is away from you.
6.
Lower the green lever with the flat green part fitting in between the rollers. Press down on the
green lever until you hear a snap.
7.
To check for proper installation, lift the green lever until it remains open. The pickup roller
assembly should be secured to the lever assembly and should not fall out.
8.
Make sure that both sides of the assembly are secured by the green hooks.
ENWW
Cleaning the all-in-one
291
9.
Lower the green lever assembly and close the ADF cover.
NOTE
If you are experiencing jams in the ADF, contact your local HP-authorized
service provider. See
HP Customer Care
.
10.
Plug in the all-in-one, and then turn on the all-in-one.
HP LaserJet 3052/3055
HP LaserJet 3390/3392
292
Chapter 12 Managing the all-in-one and maintenance
ENWW