Changing the redial settings
If the all-in-one was unable to send a fax because the receiving fax machine did not answer or was
busy, the all-in-one attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-
on-communication-error options. Use the procedures in this section to turn these options on or off.
To change the redial-on-busy option
If this option is turned on, the all-in-one redials automatically if it receives a busy signal. The factory-
set default for the redial-on-busy option is On.
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Fax setup, and then press .
3.
Use the
<
or the
>
button to select Fax Send setup, and then press .
4.
Use the
<
or the
>
button to select Redial if busy, and then press .
5.
Use the
<
or the
>
button to select On or Off, and then press .
To change the redial-on-no-answer option
If this option is turned on, the all-in-one redials automatically if the receiving machine does not
answer. The factory-set default for the redial-on-no-answer option is Off.
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Fax setup, and then press .
3.
Use the
<
or the
>
button to select Fax Send setup, and then press .
4.
Use the
<
or the
>
button to select Redial-no answer, and then press .
5.
Use the
<
or the
>
button to select On or Off, and then press .
To change the redial-on-communication-error option
If this option is turned on, the all-in-one redials automatically if some sort of communication error
occurs. The factory-set default for the redial-on-communication-error option is On.
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Fax setup, and then press .
3.
Use the
<
or the
>
button to select Fax Send setup, and then press .
4.
Use the
<
or the
>
button to select Redial Comm Err., and then press .
5.
Use the
<
or the
>
button to select On or Off, and then press .
78
Chapter 6 Fax
ENWW