Setting the fax-error-correction mode
Usually, the all-in-one monitors the signals on the telephone line while it is sending or receiving a fax.
If the all-in-one detects an error during the transmission and the error-correction setting is On, the all-
in-one can request that the portion of the fax be resent. The factory-set default for error correction is
On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you
are willing to accept the errors in the transmission. Turning off the setting might be useful when you
are trying to send a fax overseas or receive one from overseas, or if you are using a satellite
telephone connection.
To change the error-correction setting
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Fax setup, and then press .
3.
Use the
<
or the
>
button to select All faxes, and then press .
4.
Use the
<
or the
>
button to select Error correction, and then press .
5.
Use the
<
or the
>
button to select On or Off, and then press to save your selection.