Using the convenience stapler
Activate the stapling mechanism by inserting media into the convenience stapler.
To staple media by using the convenience stapler
1.
Insert up to 20 sheets of media (80 g/m
2
or 20 lb) into the slot in the stapler door. Insert fewer
sheets to staple if the media weight is heavier than 80 g/m
2
or 20 lb.
CAUTION
Do not use the convenience stapler to staple plastic, cardboard, or wood.
Damage to the convenience stapler can result from attempting to staple these materials.
NOTE
Exceeding the recommended capacity could result in jams or damage.
2.
Wait for the stapler to staple the sheets. When it is inserted all the way into the stapler slot, the
media should trigger the stapler mechanism.
ENWW
Using the convenience stapler
191
3.
Remove the stapled media from the slot.
NOTE
If you are unable to remove the media after stapling, carefully open the stapler
door and then slide your document out.
192
Chapter 10 Convenience stapler (HP LaserJet 3392 all-in-one only)
ENWW